Harry Falk Company
Shop by Brand:
Shop by Category:
Harry Falk Company
1550 91st Avenue NE #106
Blaine, MN 55449
Local: (763) 786-1093
Toll Free: 800-328-2187
(Fax: 530-658-5386)
|
Questions? (763)786-1093 |
 View Cart & Checkout
|
MIO
 |
MIO 4 Bar Rack$105.00Part ID: Equipped with 3/18" stainless steel bar rack frame and 1" diameter aluminum Brake Bars (for extra friction), Rappel Racks are the most common type of descenders in the field. The rack and bar systems allow the user to control rate of descent by varying the amount of friction by changing spacing between bars and changing the amount of bars being used.
|
 |
MIO 6 Bar Rack$105.00Part ID: Click to Enlarge Equipped with 3/18" stainless steel bar rack frame and 1" diameter aluminum Brake Bars (for extra friction), Rappel Racks are the most common type of descenders in the field. The rack and bar systems allow the user to control rate of descent by varying the amount of friction by changing spacing between bars and changing the amount of bars being used.
|
 |
MIO Replacement Aluminum Bars$9.00Part ID:
|
|
|
MIO Replacement Stainless Bars$15.00Part ID:
|
 |
MIO Rope Grab w/3' Shock Absorbing Lanyard$138.00Part ID:
|
 |
MIO Anti Panic Rope Grab w/Shock Absorbing Lanyard$154.00Part ID: Designed to operate in case of panic or normal fall situations, the MIO Anti Panic rope grab will arrest the fall even if the worker is holding the lock lever in an open position. This also includes a 3' shock absorbing lanyard.
|
 |
MIO Grab w/3' Lanyard & Hook$135.00Part ID: 7/16" RG7163L $135 1/2" RG12003L $137;+2 5/8"+3/4" RG58343L $138;+3
|
 |
MIO Cylinder W/Overspeed Control$320.00Part ID: MIOD Model MIO-D Patented is a unique Rope Descender with two built in mechanisms: Automatic Overspeed Control and a Lever Break Control. Automatic Overspeed Control: The built-in mechanism ensures complete stop in the event the speed goes over the allowed parameters. Descent control: Lever Break Control Mechanism permits the operator to vary the speed and brake at any time by moving the lever. The user is able to descent from a full "stop" to a full "go".
|
 |
MIO Cylinder W/Lever Brake$245.00Part ID: MIOD2 Vary the speed and brake at any time. Moving the lever allows the user to initiate descent from a full stop to a full go. Use with 1/2" or 7/16" rope.
|
 |
MIO Descender Rack W/Lever Brake$245.00Part ID: MIOR2 Vary the speed and brake at any time. Moving the lever allows the user to initiate descent from a full stop to a full go. Use with 1/2" or 7/16" rope.
|
 |
MIO Descender Rack W/Overspeed control$330.00Part ID: MIOR MIO-R Patented is a unique Rope Descender with two built in mechanisms: Automatic Overspeed Control and a Lever Break Control. Automatic Overspeed Control: The built-in mechanism ensures complete stop in the event the speed goes over the allowed parameters. Descent control: Lever Break Control Mechanism permits the operator to vary the speed and brake at any time by moving the lever. The user is able to descent from a full "stop" to a full "go". Rescue position: When used in this mode rescuer gains an ability to fully control victims descent.
|
 |
MIO Basic 4 Point$140.00Part ID: MBC4BC If you just need a place to sit, a waist harness, 2 hooks and 1 tool holder, this one's for you.
|
 |
MIO Delux 4 Point$205.00Part ID: MBC4EXP The comfortable padded seat, padded waist harness, 4 clips & 2 holders expain why it Delux.
|
 |
MIO Basic 2 Point Seat Board$140.00Part ID: MSB2BC This basic 2 point chair is sometimes all you need to get the job done. It has an adjustable waist belt, tool holder and 2 bucket clips.
|
 |
MIO 2 Point Deluxe Seat Board$195.00Part ID: MSB2EXP This 2 point chair comes with the padded seat, padded waist harness, 2 tool holders and 4 clips.
|
 |
MIO Roof Rig 2X4$2,850.00Part ID: M24 Model MRR250A 2x4 MINI Outreach (ft.) 2 Span from front rear wheels (ft.) 4 Counterweight (lb.) 504(12@42) Unit weight (lb.) 130 Maximum working load (lb.) 250 Working load w/ tools (lb.) 300 Tested Static Load (lb.)(CAL OSHA) 1000 Locking breaks - front and rear wheels (in.) 2 Forged eyebolts for tie-back diam.(in.) 1/2 Counterbalance safety factor 4:1 Distance from roof to anchor point (in.) 52 Inside parapet wall clearance at shoulder (in.) 43 13" diameter Pneumatic Rubber tires, qty. 6 |
 |
MIO Roof Rig 2X6$2,850.00Part ID: M26 Model MRR250A 2x6 MIDI Outreach (ft.) 2 Span from front to rear wheels (ft.) 6 Counterweight (lb.) 336(8@42) Unit weight (lb.) 150 Maximum working load (lb.) 250 Working load w/ tools (lb.) 300 Tested Static Load (lb.)(CAL OSHA) 1000 Locking breaks - front and rear wheels (in.) 2 Forged eyebolts for tie-back diam.(in.) 1/2 Counterbalance safety factor 4:1 Distance from roof to anchor point (in.) 65 Inside parapet wall clearance at shoulder (in.) 55 13" diameter Pneumatic Rubber tires, qty. 4 |
 |
MIO Roof Rig 2X8$2,850.00Part ID: M28 Model MRR250A 2x8 MAXI Outreach (ft.) 2 Span from front to rear wheels (ft.) 8 Counterweight (lb.) 252(6@42) Unit weight (lb.) 145 Maximum working load (lb.) 250 Working load w/ tools (lb.) 300 Tested Static Load (lb.)(CAL OSHA) 1000 Locking breaks - front and rear wheels (in.) 2 Forged eyebolts for tie-back diam.(in.) 1/2 Counterbalance safety factor 4:1 Distance from roof to anchor point (in.) 80 Inside parapet wall clearance at shoulder (in.) 70 13" diameter Pneumatic Rubber tires, qty. 4 |
 |
MIO Roof Rig 3X6$3,225.00Part ID: M36 Model MRR250A 3x6 MIDI Outreach (ft.) 3 Span from front to rear wheels (ft.) 6 Counterweight (lb.) 504(12@42) Unit weight (lb.) 173 Maximum working load (lb.) 250 Working load w/ tools (lb.) 300 Tested Static Load (lb.)(CAL OSHA) 1000 Locking breaks - front and rear wheels (in.) 2 Forged eyebolts for tie-back diam.(in.) 1/2 Counterbalance safety factor 4:1 Distance from roof to anchor point (in.) 71 Inside parapet wall clearance at shoulder (in.) 55 13" diameter Pneumatic Rubber tires, qty. 4 |
 |
MIO Roof Rig 3X8$3,225.00Part ID: M38 Model MRR250A 3x8 MAXI Outreach (ft.) 3 Span from front to rear wheels (ft.) 8 Counterweight (lb.) 378(9@42) Unit weight (lb.) 156 Maximum working load (lb.) 250 Working load w/ tools (lb.) 300 Tested Static Load (lb.)(CAL OSHA) 1000 Locking breaks - front and rear wheels (in.) 2 Forged eyebolts for tie-back diam.(in.) 1/2 Counterbalance safety factor 4:1 Distance from roof to anchor point (in.) 86 Inside parapet wall clearance at shoulder (in.) 70 13" diameter Pneumatic Rubber tires, qty. 4
|
 |
MIO Parapet Roller$3,400.00Part ID: MPR The MIO Parapet Roller is a portable roof anchor that rests the beam on the parapet. The counter weights are rested on the cart with wheels that can be raised during work and lowered for positioning and moving on the roof. It is suitable for parapets up to 6' in height.
|
 |
MIO Parapet Clamp$560.00Part ID: MTBC This MIO clamp will work on parapet walls up to 24" thick. The ring end is used for tie back line for safety lifeline and complies with OSHA requirements. The vertical ring end is used for lifeline or suspended worker (350# Max.) Unit weights 40# and is steel construction.
|
 |
MIO Rope Connection Plate$58.00Part ID: Provides a quick, reusable field termination that eliminates the need for knots.
|
 |
MIO Swivel$119.00Part ID: SWIVEL The MIO Swivel incorporates a sealed ball bearing for smooth rotation. Ideal for using as an anchor point on the vertical rope line during a manual descent with a cylinder type descender.
|
|
|
MIO Replacement Counter Weight$54.00Part ID: MCW
|
 |
MIO Suction Cup$30.00Part ID: MCUP A fixed cable lanyard is ready for you to attach a carabiner and secure to your chair. Max 110# |