Harry Falk Company

Harry Falk Home Page View Cart & Checkout

Shop by Brand:

CMI Ettore Gemtor GREEN Harry Falk High Rise MIO Petzl Pulex Sorbo Titan Triumph Tucker Unger Wagtail Winsol

Shop by Category:

Ascenders Awning Cleaners Belts and Suspenders Bosun Chair Brushes Buckets Carabiners Chamois Chemical Cleaners CLEARANCE Decenders DI Water Systems Doodle Bug Glass Cleaners and Lubricants Gloves Gutter Cleaner Hard Water Stain Remover & Scrubbers Harness & Helmet High Rise Holsters and Pouches Ladders and Accessories Lanyard Ledger Micro Fiber Towel Miscellaneous Poles, Parts and Accessories Restore / Protect Roof Rigs Rope Rope Accessories Rope Grabs and Lanyards Rubber Replacements Safety Cone, chain, barricade tape Scrapers and Blades Scratch Removal Screen Products Scrubber Sleeve Scrubbers Bars Shoe Covers Sorbo Sponges Squeegee Channel - Clipless Squeegee Channel - Chunky Squeegee Channel With End Clip Squeegee Handle Squeegee Handle -Chunky Squeeqee Handle - Clipless Steel Wool - Scrub Pads Suction Cups Teaching Tools Tool Lanyard Towels Water Key Waterfed Poles and Parts Waterfed Systems

Harry Falk Company
1550 91st Avenue NE #106
Blaine, MN 55449

Local: (763) 786-1093
Toll Free: 800-328-2187
(Fax: 530-658-5386)

Decenders

Rope Rider

$375.00

Part ID: RR

For 7/16"or 1/2" Rope ie New England Rope Pull down on the sleeve to go---let go to stop! That's it. The Rope Rider was designed for every day use with 1/2 inch (13 mm) or 7/16 inch (11 mm) nylon or polyester, single or double braided rope. This personal lowering device offers unique design features: * Built-In Safety Brake - the only one of its kind. * Aluminum Alloy Construction for tenacity and endurance. * Each unit is individually proof tested - spring loaded to control rope motion. * Four Rope slots to fine tune the descent rate. * Solid Connecting eye to link the harness seat board and other apparatus.

[Add to Cart]

MIO 4 Bar Rack
$115.00

Part ID:

Equipped with 3/18" stainless steel bar rack frame and 1" diameter aluminum Brake Bars (for extra friction), Rappel Racks are the most common type of descenders in the field. The rack and bar systems allow the user to control rate of descent by varying the amount of friction by changing spacing between bars and changing the amount of bars being used.

MIO 6 Bar Rack
$120.00

Part ID:

Click to Enlarge Equipped with 3/18" stainless steel bar rack frame and 1" diameter aluminum Brake Bars (for extra friction), Rappel Racks are the most common type of descenders in the field. The rack and bar systems allow the user to control rate of descent by varying the amount of friction by changing spacing between bars and changing the amount of bars being used.

MIO Replacement Aluminum Bars
$10.00

Part ID:

MIO Replacement Stainless Bars
$16.00

Part ID:

Miller Descent Device
$260.00

Part ID: 8113

The Miller Decent Device allows for smooth controlled movement. The user controls speed of decent and stopping by applying slight outward pressure on the free end of the line. Use 1/2" rope.

MIO Cylinder W/Overspeed Control
$345.00

Part ID: MIOD

Model MIO-D Patented is a unique Rope Descender with two built in mechanisms: Automatic Overspeed Control and a Lever Break Control. Automatic Overspeed Control: The built-in mechanism ensures complete stop in the event the speed goes over the allowed parameters. Descent control: Lever Break Control Mechanism permits the operator to vary the speed and brake at any time by moving the lever. The user is able to descent from a full "stop" to a full "go".

MIO Descender Rack W/Overspeed control
$345.00

Part ID: MIOR

MIO-R Patented is a unique Rope Descender with two built in mechanisms: Automatic Overspeed Control and a Lever Break Control. Automatic Overspeed Control: The built-in mechanism ensures complete stop in the event the speed goes over the allowed parameters. Descent control: Lever Break Control Mechanism permits the operator to vary the speed and brake at any time by moving the lever. The user is able to descent from a full "stop" to a full "go". Rescue position: When used in this mode rescuer gains an ability to fully control victims descent.

MIO Cylinder W/Lever Brake
$225.00

Part ID: MIOD2

Vary the speed and brake at any time. Moving the lever allows the user to initiate descent from a full stop to a full go. Use with 1/2" or 7/16" rope.

MIO Descender Rack W/Lever Brake
$250.00

Part ID: MIOR2

Vary the speed and brake at any time. Moving the lever allows the user to initiate descent from a full stop to a full go. Use with 1/2" or 7/16" rope.

Petzl Descender
$235.00

Part ID:

The anti panic feature allows for manual or auto-braking. Easily installs on the rope without disconnecting from your harness. Comes in 2 sizes:D20L=use with 7/16" or 1/2" rope or D20S=use with 7/16" only.

CMI NFPA Rack
$98.00

Part ID: 426

CMI Sport Racks are formed from 3/8" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". The result is a longer wearing bar with maximum control. With the "open back" style of the bars featured on CMI Rappel Racks, improper rigging is easier to spot which aids in accident avoidance. CMI Rescue Racks are designed along the lines of the original "super rack." They come pre-rigged with six bars, five straight slotted stainless steel and an oversize aluminum top bar to aid in locking off. Strength:19,000lbs
[Add to Cart]

Kong Descender
$158.00

Part ID: KD

Kong has done it again! A rappel device that has auto locking capabilities. It will lock on any 10-13mm rope when you use the break or let go of the rope.

Sky Genie Descender
$200.00

Part ID: SGD

Use with 1/2" rope. You preset the speed of your decent by the number of wraps around the shaft. Fewer wraps for quicker decent. Lock in position by looping the free end of line over the top.